Advantages of glued laminated timber

Переруб из клееного бруса
It does not change its shape during operation
It has lower thermal conductivity
Grooves along the length of the beam firmly fix the beam in the wall and do not allow moisture to pass through - no sealant is required
It has high quality of front surfaces
It has greater strength compared to ordinary wood
It has minimal shrinkage in height
The wall looks monolithic and does not require additional finishing
No cracks

Brief characteristics of timber

Length up to 18 meters

Сращивание бруса по длине до 18 метров позволяет делать длинные стены и балки без стыков

Cup angle - 450, 600, 900

Соединение стен между собой
может быть под любым углом согласно технического задания

European profile

Glued laminated timber profile - in European style

Влажность - 10-12%

The lamellas are dried to 8-10% humidity, after gluing the timber can gain moisture up to 10-12%

Wood species - spruce, pine

Клееный брус изготавливается из
ели или сосны собственной
переработки

Certification

Наша продукция, в том числе клееный брус, прошли обязательное подтверждение соответствия требованиям технического регламента ТР 2009/013/BY

Production technology for glued laminated timber

Softwood sawlogs (pine, spruce) are sawn into timber of the required dimensions.
Timber is sorted by quality and allowable wood defects.
The selected timber is dried to the required moisture content level.
Board defects are cut out.
The resulting blanks are finger-jointed along the length to produce a lamella, which is a component of glued laminated timber. The lamellas are then planed.
It features minimal height shrinkage.
The timber is profiled.
Interlocking joints are cut according to the project documentation.
Мы используем cookie. Это позволяет нам анализировать взаимодействие посетителей с сайтом и делать его лучше. Продолжая пользоваться сайтом, вы соглашаетесь с использованием файлов cookie.
Закрыть